Hydraulic Angle Notching(Cutting) Machine

Applicable Industry:
Used for cutting corner of angles and also used for punching & marking by installing of mould.
Description:
Main Machine:
The machine with opening C-type structure, the upper part is the cylinder, the the lower part is the work table, which provide support for the mold, meet the strength and rigidity of the machine requirements..
Cutting molds:
Part of the mold adopt sliding guide, this structure to bear a large partial load, high precision guide. Molds is divided into pressure head, coupling shaft, upper blades holder, nether blades supporter, upper blades, nether blades and the worm gear transmission system.
The pressure head is mounted on the piston rod, the coupling shaft is mounted on the upper tool holder, the coupling shaft can rotate in the pressure head, and the whole upper and lower turret can be rotated 360 degrees by the worm gear driving.
This structure adopts the sliding guide way to guide the upper and lower frame, the gap of the upper and lower blades through adjust the nether blade to achieve shearing the different thickness of angle steel.
Under the tool holder is cast steel, bear the load, greatly improving machine stability. In order to make the workpiece without rotation, the molds adopt geared motor + worm gear drive, can arbitrarily adjust the shearing angle.
The machine can be installed marking & punching system by customers' request, that is, only need to exchange moulds so as to carry out marking or punching of angles.
Hydraulic Station:
Hydraulic system consists of fuel tank, motor, high and low pressure pump, control valve, oil filter, shear cylinders and other components, is the power source of cutting cylinder. Electromagnetic valve, relief valve, unloading valve, are imported parts, reliable performance, long service life.


Main parameters:

Model	TQJ200
Functions	Used for cutting corner of angles in steel tower industry
Max. Angle size(mm)	200x200x20 (Q235-A, σb≈410MPa) 200x200x18 (Q420-A, σb≈680MPa)
Cutting length(mm)	300
Nominal pressure(kN)	1400
Times of stroke(min-1)	20
Rated pressure of hydraulic system (Mpa)	22
Power of motor(kW)	18.5
Throat depth(mm)	325
Rotary angles of corner cutting mould	360°
Cutting angle	0°- 45°
Overall dimensions L×W×H(mm)	2635mmx1200mmx2300mm
Weight(KG)	6500

Main components:

No.	Name		Brand
Main Electric Components
1	Low-voltage apparatus		SIMENS
2	Travel switch		Japan YAMATAKE
Main Hydraulic Components
1	Hydraulic	Electromagnetic Overflow Valve	Italy ATOS

Spare Parts List:

No.	Name	Material	Qty.	Remark
1	Short upper blade	9CrSi	2
2	Long upper blade	9CrSi	2
3	Long nether blade	9CrSi	2
4	Short nether blade	9CrSi	2
5	Combination pad		1 sets
6	O ring		1 sets
7	Standby paint		1pail
8	Operation Manual		2 sets

Contact us if you need more details on Notching Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Angle Notching、Notch Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Angle Notching Machine