Punching, Cutting, Bending Machine with Multi Iron Worker
Basic Info
Model No.: 70T
Product Description
Model NO.: 70T Specification: 164*71*180cm HS Code: 84624900 Trademark: RSM Origin: China Kunshan Resource Sheetmetal Machinery Co.,Ltd
Address:Room 1713, Asia Pacific Plaza, No. 18 Zhaofeng road, Huaqiao CBD, Kunshan, Jiangsu
Tel:86-512-50339036 Fax:86-512-50339036 Mob:86-15814103705
Web:
MULTI HYDRAULIC STEEL/IRONWORKER
Multi Series of Hydraulic steel/ironworker
We have different Model between 60tons and 175tons in MULTI series of Steel/Ironworker, 5 workstations(Hole punch,shape iron angle iron, thick plate cutting, round steel, square steel and corner cutting stations) and double hydraulic stations are standard configuration in the machine, two sides(punch and cut) can work together, machine can work immediately without leveling.
Technical features
MULTI Steel/Ironworker is machined by machining center to ensure the good mechanical accuracy, assembly according to European assembly-ine mode, and tested by European related standards, widely sold in Europe and USA markets.
These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations.
Comprehensive safety guards are fitted as standard on all work stations. Free standing on a suitable floor, they just require electrical connection to be ready for work.
two Shielded foot controls
For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch station.
the system and switch
The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning.
Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.
An optional
An optional "Production Pack" is available to enchance the machine specification, this includes:1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.
Low maintenance
On the cutting station, angle iron can be cut on every angle from 45º up to 90º, both internal and external, without any adaptations to the machine.Flanges from larger angle-iron can be mitre cut with the shear. Moreover, the machines are equipped with centralised pressure lubrication being one feature of the low maintenance requirements.
Extensive range of standard equipment
The universal steelworkers are delivered with and extensive range of standard equipment, such as large heavy-duty tables on the punch-, shear-, and notching station. Easy adjustable holddowns to enable production in a safe and accurate way are fitted on every station. Free standing on suitable floor, they just need electrical connection to be ready to work.
TECHNICAL SPECIFICATION
Contact us if you need more details on Iron Worker. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Steel Worker、Steelworker. If these products fail to match your need, please contact us and we would like to provide relevant information.
Address:Room 1713, Asia Pacific Plaza, No. 18 Zhaofeng road, Huaqiao CBD, Kunshan, Jiangsu
Tel:86-512-50339036 Fax:86-512-50339036 Mob:86-15814103705
Web:
MULTI HYDRAULIC STEEL/IRONWORKER
Multi Series of Hydraulic steel/ironworker
We have different Model between 60tons and 175tons in MULTI series of Steel/Ironworker, 5 workstations(Hole punch,shape iron angle iron, thick plate cutting, round steel, square steel and corner cutting stations) and double hydraulic stations are standard configuration in the machine, two sides(punch and cut) can work together, machine can work immediately without leveling.
Technical features
MULTI Steel/Ironworker is machined by machining center to ensure the good mechanical accuracy, assembly according to European assembly-ine mode, and tested by European related standards, widely sold in Europe and USA markets.
These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations.
Comprehensive safety guards are fitted as standard on all work stations. Free standing on a suitable floor, they just require electrical connection to be ready for work.
two Shielded foot controls
For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch station.
the system and switch
The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning.
Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.
An optional
An optional "Production Pack" is available to enchance the machine specification, this includes:1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.
Low maintenance
On the cutting station, angle iron can be cut on every angle from 45º up to 90º, both internal and external, without any adaptations to the machine.Flanges from larger angle-iron can be mitre cut with the shear. Moreover, the machines are equipped with centralised pressure lubrication being one feature of the low maintenance requirements.
Extensive range of standard equipment
The universal steelworkers are delivered with and extensive range of standard equipment, such as large heavy-duty tables on the punch-, shear-, and notching station. Easy adjustable holddowns to enable production in a safe and accurate way are fitted on every station. Free standing on suitable floor, they just need electrical connection to be ready to work.
TECHNICAL SPECIFICATION
MODEL | COMPACT60 | COMPACT70 | COMPACT80 | COMPACT95 | COMPACT125 | COMPACT175 | |||
RATED CAPACITY | 60T | 70T | 80T | 95T | 125T | 175T | |||
PUNCHING(STANDARD CONFIGURATION) | |||||||||
Hole Punching(Diameter x Thickness) | 28 X 15 | 26 X 20 | 28 X 20 | 27 X 25 | 32 X 25 | 40 X 32 | |||
Max. hole punching(Diameter x Thickness) | 57 X 8 | 57 X 9 | 57 X 10 | 57 X 12 | 57 X 16 | 57 X 22 | |||
Stroke | 55 | 55 | 55 | 80 | 80 | 80 | |||
Standard depth of throat | 305 | 355 | 305 | 355 | 355 | 625 | |||
Extend depth of throat | 625 | 625 | 625 | 625 | 625 | 625 | |||
Max. hole size for standard punching | 57 | 57 | 57 | 57 | 57 | 57 | |||
Max. hole size for option * | 160 | 160 | 160 | 160 | 225 | 225 | |||
Max.section steel | 305 | 305 | 305 | 305 | 305 | 380 | |||
SHEARING(STANDARD CONFIGURATION) | |||||||||
Max. thickness for plate | 230 X 20 | 300 X 20 | 300 X 20 | 380 X 20 | 380 X 25 | 380 X 30 | |||
Max. width for plate | 375 X 10 | 375 X 15 | 450 X 15 | 480 X 15 | 600 X 15 | 600 X 20 | |||
Cut corner in angle steel, Max. 45 degree | 100 X15 | 100 X15 | 100 X15 | 120 X15 | 125 X15 | 125 X15 | |||
ANGLE CUTTING(STANDARD CONFIGURATION) | |||||||||
90° | 130 X 13 | 130 X 13 | 150 X 13 | 150 X 15 | 150 X 18 | 200 X 20 | |||
45° | 70 X 10 | 70 X 10 | 70 X 10 | 80 X 10 | 80 X 10 | 80 X 10 | |||
SECTION CUTTING(STANDARD CONFIGURATION) | |||||||||
Round steel/Square steel | 45 | 45 | 45 | 50 | 55 | 65/55 | |||
Channel steel/H steel * | 130 X 65 | 130 X 65 | 130 X 65 | 160 X 90 | 200 X 100 | 300 X 125 | |||
T steel * | 90 X 12 | 90 X 12 | 90 X 12 | 100 X 12 | 120 X 12 | 150 X 15 | |||
NOTCHING(STANDARD CONFIGURATION) | |||||||||
Plate thickness | 10 | 10 | 12 | 13 | 13 | 16 | |||
Width-rectangle | 45 | 45 | 40 | 52 | 60 | 60 | |||
Depth-rectangle | 90 | 90 | 90 | 100 | 100 | 100 | |||
Depth-V shape | 60 | 60 | 60 | 70 | 80 | 80 | |||
Cut edge | 100 X 10 | 100 X 10 | 100 X 10 | 100 X 13 | 100 X 13 | 110 X 14 | |||
* CONER NOTCH(OPTIONAL) | |||||||||
Max. corner cutting ability | 250 X 6 | 250 X 6 | 250 X 6 | 250 X 6 | 250 X 6 | 250 X 6 | |||
* TUBE NOTCH(OPTIONAL) | |||||||||
Max. outside diameter for tube | 83 | 83 | 83 | 108 | 108 | 165 | |||
* BENDING(OPTIONAL) | |||||||||
flat steel bending | 250 X 12 | 250 X 13 | 250 X 13 | 250 X 20 | 250 X 22 | 250 X 25 | |||
plate bending | 500 X 3 | 500 X 3 | 500 X 3 | 500 X 3 | 700 X 3 | 700 X 4 | |||
* PUNCHING AT NOTCH STATION(OPTIONAL) | |||||||||
Depth | 125 | 125 | 125 | 125 | 125 | 125 | |||
Max. ability | 38 X 7 | 38 X 8 | 38 X 8 | 38 X 10 | 38 X 12 | 38 X 13 | |||
TECHNICAL DATA | |||||||||
Power for main motor | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 11.0 | |||
Net weight for machine | 1570 | 1620 | 1925 | 2730 | 3100 | 5550 | |||
Machine size (L x W x H cm) | 164 X 71 X 178 | 164 X 71 X 180 | 190 X 79 X 191 | 190 X 79 X 191 | 200 X 80 X 203 | 270 X 112 X 216 | |||
* is optional items. | |||||||||
Above data is based on material with tensile strength 450n/mm2 |
Contact us if you need more details on Iron Worker. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Steel Worker、Steelworker. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Hydraulic Ironworker/Steelworker > Others Hydraulic Ironworker/Steelworker
Other Products
Hot Products
Iron Worker Combined Iron WorkerIron Worker Combined Punching MachineMechanical Gear Shaping Machine (B6050)Hydraulic Notching Machine for Variable Angle (QX28Y-6X200)Universal Millling Machine Machine, 4vh4-Cloumn Hydraulic Oil Press Machine (YQ32-160)Steelworker Machine, Steel Ironworker, Metalworker Machine for Stainless (Q35Y-30)Thick Punch Dies for Amada Punch MachineCNC Turret Punching Machine (VT300)Sheet Metal Nc Shearing Machine with Laser (QC12K-10X3200)Lathe Machine, Heavy Duty Lathe Machine, Horizontal Lathe (CW61110, 1100-3000mm)Amada Goose Neck Punch Press Brake Tooling for Bending Machine160 Ton Pneumatic Power Press, C Frame Power Press (JH21-160)Metal Steel Sheet Plate Cutting CNC Hydraulic Guillotine Shearing Machine (QC12Y-12X3200)CNC Hydraulic Press Brake, Hydraulic Bending Machine, CNC Press Brake (125T 3200 DA66W 4+1axes)Amada CNC Press Brake with Italy Mpf Dro (APB63.31)